FIMCO 1 ½” in 4 Outlet Indexing Valve with 2, 3 and4 Zone Cams Model# 92694-4004

Description

About this item
Valve has 1 inlet and 4 outlets that are all slip fit to accept 1 1/2" pipe. Please remember that pipe size is measured by inside diamter. Actual outlet and inlet size is 1.9"
2, 3 or 4-zone indexing capability based on the chosen cam configuration
Supports manual or automatic operation with a controller (not included) to turn on and off the water supply (pump or solenoid)
4 zone cam installed with additional 2 and 3 zone cams
Valve is recommended for use in a pump driven irrigation system
1 valve can replace up to 4 1 1/2 in. solenoids
Only use standard clear PVC cement (not included) for installation of the valve and allow 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and not the valve housing
Requires a 1 - 1-1/2 HP pump (pump not included)
Please remember that pipe size is measured by inside diameter. This valve is made to accept 1 1/2″ pipe so the outlets and inlets will be larger than the pipe size it receives.