Chevy GM LS7 250cc 60cc 6-Bolt Aluminum Bare Cylinder Heads (Pair)

Description

LS-series cylinder heads is rapidly expanding. The LS (Gen3/4) platform has many design benefits over the earlier SBC engine designs, most notably the cylinder heads. Although the GM heads are good pieces, We have developed a superior line of heads for modern performance enthusiasts. Like all of the cylinder heads, the LS-series heads are produced using our "Gravity Casting" process. This process ensures a more uniform and robust casting, laying a strong platform to build on. Take a look below at our offerings, surely you will find a head to suit your application. If you require any additional information, or help selecting the correct cylinder head for your application, please feel free to call one our techs.
INTAKE / EXHAUST GASKETS
Unlike most other Chevy V-8's, the LS-series engines utilize individual O-rings around each port to seal the intake manifold to cylinder head. The LS1 / LS2 / LS6 style heads & manifolds use GM pn# 12533587 and the LS3 / L76 / L92 style heads use GM pn# 1290125. On the Exhaust side of the head, all non-LS7 heads utilize the same MLS header gasket. The part number of the exhaust gasket is GM pn# 12901125.
HEAD GASKETS
Because there are so many different bore sizes for engines in the LS-series, below you will find a list Fel-Pro head gasket part numbers and their bore size:
Bore Size
Fel-Pro#
3.945" 1160L/R (ea.)
4.100" 1161L/R (ea.)
4.170" 1162L/R (ea.)
HEAD BOLTS / STUDS
Unlike the early GM heads, heads use common length head bolts / studs. Starting in 2004, GM heads went to the same common length head bolt arrangement. By using bolt / stud registers that are all the same thickness, equal clamp load is created all the way around each cylinder.
The ARP part numbers that work with our LS-series heads are # 134-3610 (bolts) and #23-4317 (12pt. stud kits)
DO NOT RE-USE GM HEAD BOLTS, THEY ARE TORQUE-TO-YIELD (TTY) AND CAN ONLY BE USED ONCE!
Torque the 11mm. bolts / studs to 65lbs and the 8mm bolts / studs to 20lbs. using high pressure moly lubricant.
*Please consult your hardware supplier for their specific torque recommendations!
SPARKPLUGS
Be careful with your selection of sparkplugs in the LS-series engines. The OEM plug is a NGK TR5. We recommend that you use NGK TR6 sparkplugs on performance oriented engines. If you require a sparkplug colder that a 6 heat range, you will have to switch away from resistor style plugs, and into the NGK R5724-7 or R5724-8. These colder plugs dont have an internal resistor, so they my cause some slight RF interface. Usually it's not a problem unless you have a really sensitive aftermarket ECU, and even then it's not normally a problem.
If your prefer Autolite sparkplugs, use the AR103 for street / strip performance engines. The AR94 is quite a bit colder for those of you looking to squeeze N20, or heavy boosted engines.
Part Type:
Cylinder Heads
Cylinder Head Style:
Bare
Cylinder Head Material:
Aluminum
Cylinder Head Finish:
Natural
Combustion Chamber Volume (cc):
60 cc
CNC-Machined Combustion Chamber:
No
Intake Runner Volume (cc):
250 cc
Exhaust Runner Volume (cc):
n/a
CNC-Machined Intake Runner:
No
CNC-Machined Exhaust Runner:
No
Intake Port Shape:
Rectangular
Intake Port Location:
Standard
Exhaust Port Shape:
Oval
Exhaust Port Location:
Standard
Comp. Valve Job:
No
Intake Valves Included:
No
Intake Valve Diameter (in):
2.200 in.
Exhaust Valves Included:
No
Exhaust Valve Diameter (in):
1.600 in.
Valve Springs Included:
No
Damper Spring Included:
No
Retainers Included:
No
Locks Included:
No
Valve Stem Seals Included:
No
Rocker Arm Studs Included:
No
Rocker Arms Included:
No
Rocker Arm Nuts Included:
No
Guideplates Included:
No
Valve Cover Mounting Style:
Perimeter Bolt
Accessory Bolt Holes Drilled:
Yes
Intake Valve Angle:
15 deg.
Exhaust Valve Angle:
15 deg.
Valve Guides Included:
Yes
Valve Guide Material:
Steel
Valve Seats Machined:
Yes
Valve Seat Machine Style:
3-angle
Valve Seat Material:
Ductile iron
Steam Holes Drilled:
No
Oiling Style:
Through pushrod
Machined for O-Ring:
No
Heat Crossover:
No
Quantity:
Sold individually.
Calculator
Compression Calculator
*****SHIPPING TERMS*****
The fixed shipping price shown for all ads is within the Continental  48 states ONLY!!
We are happy to combine shipping when possible. Some items are able to be combined due to size or weight. On multiple item purchase the shipping amount is not figured automatically during checkout so please request a complete shipping quote. If you have any doubt as to what your shipping charges will be, please feel free to contact us directly.
*****TAX MESSAGE*****
Alabama
Residents are subject to a 10% State Sales Tax on any purchase!
*****FEEDBACK*****
Please, we ask that you leave a POSITIVE feedback for us once you have received and inspected the purchased item. Contact us immediately if there is any problem or concern regarding your item so that we may work with you to eliminate that concern or problem you might have. Once all concerns of yours are rectified we ask that you then leave a POSITIVE feedback for us as we shall do so in return
.
You may be interested in
our other eBay listings
.
CHECK US OUT ON THE WEB ALSO!!!
www.angusracing.com
Thank you very Much,
We Appreciate your Patronage!
Angus Racing Products LLC