3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter

Description

3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter
Easy To Use: Easily connect 1/2" drip irrigation tubing to any standard 3/4" faucet, hose bibb or garden hose. Just insert and twist, no special tools needed. Each swivel irrigation fitting includes a pre-installed rubber washer to provide a water-tight seal.
Stress-Free Fit: Our irrigation faucet adapter connection works with the widest range of half inch tubing, from .520 to .620" Inside Diamater, .620 to .710” Outside Diameter and .045 to .055 Wall Thickness. Please make sure your tubing specifications fall within these ranges for the proper fit. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2" blank drip irrigation tube or drip line. Large fitting ID means less flow restriction.
Zero Leaks: Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure.
Reusable & Long Lasting: Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use.
Patented Locking Technology: Quickly revolutionizing irrigation fitting expectations worldwide, the patented locking technology works great under high pressures and around heavy foot traffic. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on.
Qty: 3 Pack. You will receive a pack of 3 individual drip irrigation adapters. These connectors are ideal supplies for drip system irrigation kit installations such as drip line or other low flow agriculture, landscape, residential and commercial irrigation. Perfect irrigation riser part for conversion of 1/2" tubing to your water source, such as an outdoor spigot, hose bib or manifold, garden hose or soaker hoses. With nearly universal fit, these drip system irrigation adapter attachments are essential drip irrigation parts for your drip irrigation system setup or repair. To Install: 1) Do not remove the collar. Twist the collar clockwise toward center of fitting. 2) Firmly push the end of the irrigation tubing over the exposed male barb. If necessary you can warm the 1/2 tubing by letting it sit in the sun or running hot water or a hair dryer over it so it will stretch over the barb component fairly easily. 3) Twist collar counter-clockwise to secure tubing or tape connections. Specifications: - 3/4" Female Hose Thread (threaded FHT) x 1/2" or 5/8" Tubing - Acceptable Inside Diameter: 0.520 - 0.620 in (13.2 to 15.7mm) -Acceptable Wall Thickness: 0.045 to 0.055 in (1.14 to 1.40mm) - For use with 16 mm, 17 mm and 18 mm tubing - Materials: Glass reinforced Polypropylene - Operating pressure up to 60 PSI - Positive stop to assure tubing in fully installed - Low effort, quickly locks in place, no special tools needed - Barbed head ensures distribution tubing will not slip out or blow off at high pressure and temperature - To connect Total CV and poly / polyethylene supply tubing or distribution hose tubing - Removable lock collar for flushing or winterizing the drip system
SHIPPING
Domestic Buyers
- We ship within 3 business days of payment, usually sooner
- We offer FREE shipping on all orders!
- We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed
- We have confidence in our products, but if you are not fully satisfied please contact us within 30 days of purchase and you will get full refund.
International buyers
– please note: Import duties, taxes, and charges aren't included in the item price or postage cost. These charges are the buyer's responsibility.
- Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
*  Order Cancellation Policy **
You can return a product for up to 30 days from the date you purchased it.
1. The seller reserves the right to cancel the special case only due to eBay cancellation fee.
2. The decision of seller is the final.
3. The seller will respond to the cancellation request within 2 business days. Please wait for the result of cancellation.
4. In case the cancellation is not completed by some reasons, the buyer can follow the options below to get the refund.
4.1 The buyer can reject the item when it arrives.
4.2 The buyer can send the item back to the seller within 30 days If the buyer receives item (USA Shipment ONLY). The seller will provide the FREE return label to the buyer when the buyer opens " Return Item" case on eBay by using the reason as "Change my mind" ONLY.
5. When buyer has placed the order. The order will be processed and completed by automatic warehouse system within 5 minutes. In case that buyer sends the cancellation request after 5 minutes of placing the order, the request will be rejected.
**Sending direct message to cancel the order is not allowed for every case.*
Return Policy
For the return case
- If buyer would like to return the items for refund or replacement, please CONTACT SELLER to receive the free return label from seller. The refund or replacement will be processed with the tracking number of return label which is provided by seller only. The other ways of return which are not approved by seller will not be processed for the refund or replacement.